SCR2 N-100 Titan Tankless Water Heater, Tankless Water Heaters

The Titan SCR2 N-100 continually heats water instantaneously as you require it - and only when you require it. The Titan unit completely replaces a conventional tank heater with no disruption to your comfort and hot water needs. This unit is highly recommended in areas with warm climates where the incoming water temperature is above 69° degrees Fahrenheit.

Recommended Use

1 - 1.5 standard bathrooms Apartments
1 - 1.5 standard bathrooms Condos
1 - 1.5 standard bathrooms large efficiencies

Temperature Rise Chart (° Fahrenheit) above your ambient temperature

Flow Rate	1.0 GPM	1.5 GPM	2.0 GPM	2.5 GPM	3.0 GPM	3.5 GPM	4.0 GPM
Temp Rise	74°	49°	37°	30°	25°	21°	18°

Notes: GPM - Gallons per minute. Degrees (°) Fahrenheit. Values are approximate.

Electrical Requirements

Breakers & Wire	Max kW @ 220V/240V	Available Voltage	Max AMP @ 220V / 240V
50 Double Pole / 6 AWG Wire (2-1 type, 2 hots + ground)	10.8kW	208V/220V 240V/277V	49

Notes: Ratings above using standard 240 Volts. Higher voltage will increase power, just as lower voltage will have the reverse effect. When installing, check specifications on unit used. Voltage, amperage, breaker and wire size may vary depending on local electrical standards. Consult your local professional for guidance.

Technical Specifications (Specs)

Brochure/Specifications Sheet
Installation Manual
Dimensions: 7"W x 10"H x 2.75"D
Weight: 8 Lbs
Water Connections: 1/2"
Water Pressure (Max): 150 psi
Voltage: 220 / 240
Min. Flow Rate (Activation): 0.5 GPM
Manufacturer's Warranty: 1 Year Electrical Components / 10 Years Water Components