SCR3 N-160 Titan Tankless Water Heater, Tankless Water Heaters

New 2015 Model All Digital NEW 2019 MODEL!
Digital control interface using LCD screen for advanced operation, and diagnostics. The display allows the user to see the percentage of power being used and saved. The display also shows kilowatts, amperage, and volts.

The SCR3 N-160 Titan tankless water heaters continually heat water instantaneously as you require it - and only when you require it. These units are ideal for medium to large homes in Southern climates, and small to medium homes in Northern climates. As with all our tankless water heaters, this units will not run out of hot water.

Recommended Use

For medium to large homes with ground water temperature of 65° F or higher
For small to medium sized homes with ground water temperature of 55° F or higher.

Temperature Rise Chart (° Fahrenheit)

Flow Rate	1.0GPM	1.5 GPM	2.0 GPM	2.5 GPM	3.0 GPM	3.5 GPM	4.0 GPM
Temp Rise	109°	73°	55°	44°	36°	31°	27°

Notes: GPM - Gallons per minute. Degrees (°) Fahrenheit. Values are approximate.

Electrical Requirements

	Breakers	Wire (2-1 type, 2 hots + ground)	Max kW	Max AMP
240v	70 amp	4/6* AWG	16 kW	66
208v	60 amp	6 AWG	12 kW	55

Notes: Ratings above using standard 240 Volts. Higher voltage will increase power, just as lower voltage will have the reverse effect. When installing, check specifications on unit used. Voltage, amperage, breaker and wire size may vary depending on local electrical standards. Consult your local professional for guidance.
* Please consult your local codes and/or professional installer for obataining correct wire size.

Technical Specifications (Specs)

Brochure/Specifications Sheet
Installation Manual
Dimensions: 7"W x 10"H x 3"D
Weight: 9 Lbs
Water Connections: 1/2"
Water Pressure (Max): 150 psi
Voltage: 208 / 240 Volts
Min. Flow Rate (Activation): 0.4 GPM
Manufacturer's Warranty: 1 Year Electrical Components / 10 Years Water Components