The Titan SCR2 N-75 continually heats water instantaneously as you require it - and only when you require it. The Titan unit completely replaces a conventional tank heater with no disruption to your comfort and hot water needs. This unit is highly recommended in areas with warm climates where the incoming water temperature is above 75° degrees Fahrenheit and low water flow usage.
IMPORTANT: This is a special order item. This item ships within 7 days and it is non-returnable. All sales are final.
Recommended Use (Point of Use)
- Boat
- Laboratory
- Dishwasher
- Washer
| Temperature Rise Chart (° Fahrenheit) above your ambient temperature | Flow Rate | 1.0 GPM | 1.5 GPM | 2.0 GPM | 2.5 GPM | 3.0 GPM | 3.5 GPM | 4.0 GPM | Temp Rise | 44° | 29° | 22° | 17° | 15° | 12° | 11° |
|
|
Notes: GPM - Gallons per minute. Degrees (°) Fahrenheit. Values are approximate. |
| |
| Electrical Requirements |
Breakers & Wire | Max kW @ 220V/240V | Available Voltage | Max AMP @
220V / 240V | 40 Double Pole /
8 AWG Wire
(2-1 type, 2 hots + ground) | 7.5kW | 208V/220V
240V/277V | 34 |
|
Notes: Ratings above using standard 240 Volts. Higher voltage will increase power, just as lower voltage will have the reverse effect. When installing, check specifications on unit used. Voltage, amperage, breaker and wire size may vary depending on local electrical standards. Consult your local professional for guidance. |
| |
Technical Specifications (Specs) |  Brochure/Specifications Sheet
Installation Manual
Dimensions: 7"W x 10"H x 2.75"D
Weight: 8 Lbs
Water Connections: 1/2"
Water Pressure (Max): 150 psi
Voltage: 220 / 240
Min. Flow Rate (Activation): 0.5 GPM
Manufacturer's Warranty: 1 Year Electrical Components / 10 Years Water Components
|
|
| |
